Instrumentation Cables 

   EN 50288-7 Instrumentation Cables
PE Insulated, LSZH Sheathed, Overall Screened & Armoured Instrumentation Cables (Multipair)

RE-2Y(St)HSWAH 90°C / 300V

EN 50288-7 Instrumentation Cables

STANDARDS
Basic design to EN 50288-7 

APPLICATION 
The armoured LSZH sheathed cables are generally used when the risk of mechanical damage is increased.
The galvanized steel wire armour provides excellent protection. Generally, the cables are used within industrial process manufacturing plants for communication, data and voice transmission signals and services. Also used for the  interconnection of electrical equipment and instruments, the LSZH sheath can reduce toxic smoke and fume emission. 

FIRE PERFORMANCE

Flame Retardance (Single Vertical Wire Test) EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2; VDE 0482-332-1; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2); 
CEI 20-35/1-2; EN 50265-2-1*; DIN VDE 0482-265-2-1*
Reduced Fire Propagation   (Vertically-mounted bundled wires & cable test) EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3-24; VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070-2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4
Halogen Free IEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1; 
CEI 20-37/2-1 ; BS 6425-1*
No Corrosive Gas Emission IEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2; 
CEI 20-37/2-2 ; BS 6425-2*
Minimum Smoke Emission IEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2; 
CEI 20-37/3-1&2; EN 50268-1&2*; BS 7622-1&2*
No Toxic gases NES 02-713; NF C 20-454
Sunlight Resistance UL 1581 section 1200
Oil Resistance ICEA S-73-532**

Note: Asterisk * denotes superseded standard, **Test temperature +60°C, duration 4h. Retention: min 60% of tensite strength/min.60% of elongation.

VOLTAGE RATING
300V  

CABLE CONSTRUCTION
Conductor: Annealed copper solid or plain copper stranded to IEC 60228 Class 2.
Insulation: PE compound, EN 50290. 2-23.
Pairs: Two insulated conductors uniformly twisted together with a lay not exceeding 100mm
Binder tape: PETP transparent tape
Overall Screen: Aluminium/polyester tape is applied over the laid up pairs metallic side down in contact with tinned copper drain wire, 0.5mm²
Inner Sheath: LSZH(Low Smoke Zero Halogen) sheath
Amouring: Galvanized steel wire armour
Outer Sheath: Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1 (Thermosetting LSZH compound type
 SW2-SW4 as per BS 7655-2.6 can be offered.). UV resistance, hydrocarbon resistance, oil resistance, anti rodent and  anti termite properties can be offered as option.

COLOUR CODE
Insulation: Black / White, continuously numbered on white core(1, 2..)for multipair.
Outer Sheath: Black or blue for intrinsically safe systems

Physical AND THERMAL PROPERTIES
Temperature Range During Operation (Fixed State): -30°C – +90°C
Temperature Range During Installation (Mobile State): -20°C – +50°C
Minimum Bending Radius:
 10 X Overall Diameter

CONSTRUCTION PARAMETERS

Caledonian Cable Code

RE-2Y(St)HSWAH

No. of Pairsx2 xCross  Section Nominal Insulation Thick-ness Nominal Inner Sheath Thick -ness Nominal Overall  Diameter  Over Inner   Sheath Nominal Armour  Wire  Diameter Nominal Outer Sheath Thick -ness Nominal Overall Diameter Approx.  Weight
No.x2xmm2 mm2  mm  mm  mm  mm mm  kg/km 

0.5mm2, Multipair

RE-2Y(St)HSWAH 2P0.5 2x2x0.5 0.35 0.9 7.6 0.9 1.3 12.0 262
RE-2Y(St)HSWAH 4P0.5 4x2x0.5 0.35 0.9 8.8 0.9 1.4 13.4 325
RE-2Y(St)HSWAH 5P0.5 5x2x0.5 0.35 1.0 9.8 0.9 1.4 14.4 375
RE-2Y(St)HSWAH 6P0.5 6x2x0.5 0.35 1.0 10.6 0.9 1.4 15.2 411
RE-2Y(St)HSWAH 8P0.5 8x2x0.5 0.35 1.0 11.3 0.9 1.4 15.9 473
RE-2Y(St)HSWAH 10P0.5 10x2x0.5 0.35 1.1 12.9 0.9 1.5 17.7 537
RE-2Y(St)HSWAH 12P0.5 12x2x0.5 0.35 1.1 13.5 0.9 1.5 18.3 576
RE-2Y(St)HSWAH 16P0.5 16x2x0.5 0.35 1.1 15.2 0.9 1.5 20.0 824
RE-2Y(St)HSWAH 20P0.5 20x2x0.5 0.35 1.2 16.9 0.9 1.6 21.9 949
RE-2Y(St)HSWAH 24P0.5 24x2x0.5 0.35 1.2 18.3 1.25 1.6 24.0 1030

0.75mm2, Multipair

RE-2Y(St)HSWAH 2P0.75 2x2x0.75 0.38 0.9 8.5 0.9 1.4 13.1 308
RE-2Y(St)HSWAH 4P0.75 3x2x0.75 0.38 1.0 10.0 0.9 1.4 14.6 383
RE-2Y(St)HSWAH 5P0.75 4x2x0.75 0.38 1.0 10.9 0.9 1.4 15.5 448
RE-2Y(St)HSWAH 6P0.75 5x2x0.75 0.38 1.0 11.8 0.9 1.4 16.4 482
RE-2Y(St)HSWAH 8P0.75 8x2x0.75 0.38 1.1 12.8 0.9 1.5 17.6 534
RE-2Y(St)HSWAH 10P0.75 10x2x0.75 0.38 1.1 14.5 0.9 1.5 19.3 654
RE-2Y(St)HSWAH 12P0.75 12x2x0.75 0.38 1.1 15.1 0.9 1.5 19.9 826
RE-2Y(St)HSWAH 16P0.75 16x2x0.75 0.38 1.2 17.3 0.9 1.6 22.3 967
RE-2Y(St)HSWAH 20P0.75 20x2x0.75 0.38 1.3 19.2 1.25 1.6 24.9 1118
RE-2Y(St)HSWAH 24P0.75 24x2x0.75 0.38 1.3 20.8 1.25 1.6 26.7 1294

1.0mm2, Multipair

RE-2Y(St)HSWAH 2P1.0 2x2x1.0 0.4 0.9 9.2 0.9 1.4 13.8 357
RE-2Y(St)HSWAH 4P1.0 3x2x1.0 0.4 1.0 10.9 0.9 1.4 15.5 450
RE-2Y(St)HSWAH 5P1.0 4x2x1.0 0.4 1.0 11.9 0.9 1.4 16.5 509
RE-2Y(St)HSWAH 6P1.0 5x2x1.0 0.4 1.0 13.0 0.9 1.4 17.6 565
RE-2Y(St)HSWAH 8P1.0 8x2x1.0 0.4 1.1 14.0 0.9 1.5 18.8 651
RE-2Y(St)HSWAH 10P1.0 10x2x1.0 0.4 1.1 15.9 0.9 1.5 20.7 886
RE-2Y(St)HSWAH 12P1.0 12x2x1.0 0.4 1.2 16.8 0.9 1.5 21.6 946
RE-2Y(St)HSWAH 16P1.0 16x2x1.0 0.4 1.2 19.0 1.25 1.6 24.7 1173
RE-2Y(St)HSWAH 20P1.0 20x2x1.0 0.4 1.3 21.1 1.25 1.7 27.0 1318
RE-2Y(St)HSWAH 24P1.0 24x2x1.0 0.4 1.4 23.1 1.25 1.7 29.0 1488

1.3mm2, Multipair

RE-2Y(St)HSWAH 2P1.3 2x2x1.3 0.45 1.0 10.4 0.9 1.4 15.0 405
RE-2Y(St)HSWAH 4P1.3 3x2x1.3 0.45 1.0 12.0 0.9 1.4 16.6 511
RE-2Y(St)HSWAH 5P1.3 4x2x1.3 0.45 1.1 13.4 0.9 1.5 18.2 595
RE-2Y(St)HSWAH 6P1.3 5x2x1.3 0.45 1.1 14.6 0.9 1.5 19.4 673
RE-2Y(St)HSWAH 8P1.3 8x2x1.3 0.45 1.2 15.7 0.9 1.5 20.5 870
RE-2Y(St)HSWAH 10P1.3 10x2x1.3 0.45 1.2 17.9 0.9 1.6 23.6 1012
RE-2Y(St)HSWAH 12P1.3 12x2x1.3 0.45 1.3 18.9 1.25 1.6 24.6 1143
RE-2Y(St)HSWAH 16P1.3 16x2x1.3 0.45 1.3 21.4 1.25 1.7 27.3 1407
RE-2Y(St)HSWAH 20P1.3 20x2x1.3 0.45 1.4 23.8 1.25 1.8 29.9 1601
RE-2Y(St)HSWAH 24P1.3 24x2x1.3 0.45 1.5 25.9 1.25 1.8 32.0 2048

1.5mm2, Multipair

RE-2Y(St)HSWAH 2P1.5 2x2x1.5 0.45 1.0 10.8 0.9 1.4 15.4 448
RE-2Y(St)HSWAH 4P1.5 3x2x1.5 0.45 1.1 12.7 0.9 1.5 17.5 530
RE-2Y(St)HSWAH 5P1.5 4x2x1.5 0.45 1.1 14.0 0.9 1.5 18.8 628
RE-2Y(St)HSWAH 6P1.5 5x2x1.5 0.45 1.2 15.2 0.9 1.5 20.0 835
RE-2Y(St)HSWAH 8P1.5 8x2x1.5 0.45 1.2 16.4 0.9 1.6 21.4 944
RE-2Y(St)HSWAH 10P1.5 10x2x1.5 0.45 1.3 18.8 1.25 1.6 24.5 1097
RE-2Y(St)HSWAH 12P1.5 12x2x1.5 0.45 1.3 19.7 1.25 1.7 25.6 1230
RE-2Y(St)HSWAH 16P1.5 16x2x1.5 0.45 1.4 22.5 1.25 1.7 28.4 1471
RE-2Y(St)HSWAH 20P1.5 20x2x1.5 0.45 1.5 25.0 1.25 1.8 31.1 1971
RE-2Y(St)HSWAH 24P1.5 24x2x1.5 0.45 1.5 27.1 1.25 1.8 33.2 2251

Note : Other conductor sizes & core configurations are available upon request

Electrical PROPERTIES

Conductor Area Size   mm 2   0.5  0.75   1.0   1.3 1.5  
Insulation thickness (nominal) mm 0.35 0.38 0.4 0.45 0.45
Conductor resistance (20°C)   Ω/km  36.7 25 18.5 14.2 12.3
Insulation resistance (20°C) MΩ.km(Min.) 5000
Mutual Capacitance (1 kHz)  pF/m(Max.)
up to 4 pairs 90  90 90 102 102
above 4 pairs 75 75 75 85 85
Capacitance unbalance(1 kHz)  pF/500 m (Max.) 500 
Inductance mH/km (Max.) 1
L / R (ratio) (max.) μH/Ω 25 25 25 40 40
Operating voltage Urms V 300

Test Voltage 

Core to Core  1500 
Core to Screen  1500